Skip to content

Marlin 2.0.X for the MKS Robin Nano 1.1/1.2

License

Notifications You must be signed in to change notification settings

le3tspeak/Marlin-2.0.X-MKS-Robin-Nano

Repository files navigation

Marlin Firmware adapted for the MKS Robin Nano 1.1/1.2

Marlin 2.0

Marlin 2.0 takes this popular RepRap firmware to the next level by adding support for much faster 32-bit and ARM-based boards while improving support for 8-bit AVR boards. Read about Marlin's decision to use a "Hardware Abstraction Layer" below.

Download earlier versions of Robin Nano Firmware on the Releases page.

Building Marlin 2.0

To build Marlin 2.0 you'll need PlatformIO. Detailed build and install instructions are posted at:

Supported Platforms

Platform MCU Board
MKS Robin Nano ARM® Cortex-M3 / STM32F103VET6 MKS Robin Nano 1.1
MKS Robin Nano ARM® Cortex-M3 / STM32F103VET6 MKS Robin Nano 1.2

Features of the Preset Configuration of Branch MKS Robin Nano

Features Active Value
Fast Config Switch Sapphire Pro/Plus/Bluer True -
UI Type - Classic Marlin
TFT Color Selection True -
EEPROM True -
G0 Support True -
G2/G3 Arc Support True -
Classic Jerk True 15
Bézier curve acceleration False -
Junction Deviation False 0.019
Mesh Bed Leveling True -
Filament sensor True -
TMC UART - Ready
TMC SPI - Ready
TMC 2209 HW Serial - Ready
Neopixel - Ready
Cancel Objects True -
Axes Sapphire Pro Sapphire Plus Bluer
X TMC2208 Standalone TMC2208 Standalone TMC2208 Standalone
Y TMC2208 Standalone TMC2208 Standalone TMC2208 Standalone
Z A4988 A4988 A4988
E A4988 TMC2208 Standalone A4988
Memory consumption Value
RAM: 44.8% (used 29368 bytes from 65536 bytes)
Flash: 44.9% (used 235476 bytes from 524288 bytes)

UI Preview

Changelog

Version Changes & Fixes
1.0.7
- Major Update
1.0.6
- Add Z2 & E1 HARDWARE_SERIAL
- Add Multi-hotend option
- Add Adv. Preset Custom thermistor
- Add SPI_FLASH
- Save EEPROM on STM32
- FIX UTF char cutoff Y
- TMC Homing stepper phase Z Disable
- Add Adv. Preset Custom Bed Size
- Add PIO MKS Robin Nano -DSS_TIMER=4
1.0.5b
- TMC SW Serial extension E1 & Z2
- Add Adv. Preset Custom PID
- Add JD_HANDLE_SMALL_SEGMENTS option
- Russian language fix
1.0.5a
- Add Adv. Preset Custom Axis Steps Per MM
- Extension of BLTouch Preset
- Add Adv. Preset Custom Stepper Motor Drivers
- Add Status Logo TT
- Add Adv. Preset Optical Endstops XY
1.0.5
- Major Update & Reworking
- Add Adv. Preset Linear Pressure Control
- Add Adv. Preset Motion Modes
- Add Adv. Preset BLTouch
- Move SD Settings to Pins
- Minor TFT Fixes
1.0.4
- Touch support for Marlin Menus
- errors moved in Sanity Check
- new TFT scale up
- improve G2/3 movement buffer
- STM32F1: Fix SDIO read errors
- Improve SD Card Read Speed
- Add Cura/Prusa Start/End Codes
- Add Cura/Prusa Profiles
1.0.3
- Add Bluer Fast Config Switch Preset
- Error messages separated
1.0.2
- Add TMC HW Serial
- Add documentation TMC HW Serial
- Add TFT Color Selection
- Fix SD Read Errors
1.0.1a Initial commit

License

Marlin is published under the GPL license because we believe in open development. The GPL comes with both rights and obligations. Whether you use Marlin firmware as the driver for your open or closed-source product, you must keep Marlin open, and you must provide your compatible Marlin source code to end users upon request. The most straightforward way to comply with the Marlin license is to make a fork of Marlin on Github, perform your modifications, and direct users to your modified fork.

While we can't prevent the use of this code in products (3D printers, CNC, etc.) that are closed source or crippled by a patent, we would prefer that you choose another firmware or, better yet, make your own.