设置一些参数配置后client必定会回一个ack

[alongpan]

当我设置keepalive大于2s的，或者是keepalive后面配置了num，或者配置protocol为http，client必定会确认一个ack，如果这些不配置client和server是一个请求一个响应，请问这个client的ack可以取消吗？

[pengjianzhang]

请详细说明一下不ACK的理由。
你试一下早期的版本，可能不会回复ACK。
我看下能不能给个配置参数关闭ACK

[alongpan]

有几种场景，如果不是测试其他服务器，只是dperf client和服务器对发数据
1、client回应ack会导致数据包多3/1（主要测pps的时候，这个倒是可以写公式解决，如果能参数控制回不回ack更好）
2、固定包长的时候回的ack是64字节，这个没法更改，比如固定测试128字节数据，出现1/3的64字节数据包

[alongpan]

这是我的配置，试了几次没有重传
#daemon
mode client
socket_mem 12000
tx_burst 8
launch_num 8
cpu 0 2 4 6
rss auto l3l4

payload_random

vlan 1234

packet_size 56
duration 3000h
cps 40000
cc 1000000
keepalive 1320ms

port 0000:04:00.0 192.168.31.10 192.168.99.240
client 192.168.31.10 200
server 192.168.99.240 1
listen 80 2
lport_range 63026-65535
http_method POST

#daemon
mode server
socket_mem 12000
tx_burst 8
payload_random
cpu 12 14 16 18
rss auto l3l4
vlan 1234

duration 3000h
packet_size 56
keepalive 10s

port 0000:04:00.1 192.168.99.240 192.168.31.10
client 192.168.31.10 200
server 192.168.99.240 1
listen 80 2

[pengjianzhang]

http协议回复ACK太快了，应该是一个Bug
keepalive超过2秒，dperf会快速回复ACK，可以做一个开关关掉

[alongpan]

我这个配置没超过2s，看数据包是不回ack的。
麻烦在基于post那个版本做个开关，谢谢。

[pengjianzhang]

http post已经合入到主干了
请在周围小伙伴里面宣传一下dperf 谢谢

[pengjianzhang]

请测一下这个分支 https://github.com/pengjianzhang/dperf/tree/disable_ack
client上配置：
disable_ack

[alongpan]

arpRx /home/dperf/build/dperf: unrecognized option '--no-telemetry'
EAL: Detected 24 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.

Usage: /home/dperf/build/dperf [options]

EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is [-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 128
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@CPUs]>[<,lcores[@CPUs]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--master-lcore ID Core ID that is used as master
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --pci-blacklist Add a PCI device in black list.
Prevent EAL from using this PCI device. The argument
format is domain:bus:devid.func.
-w, --pci-whitelist Add a PCI device in white list.
Only use the specified PCI devices. The argument format
is <[domain:]bus:devid.func>. This option can be present
several times (once per device).
[NOTE: PCI whitelist cannot be used with -b option]
--vdev Add a virtual device.
The argument format is [,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog Set syslog facility
--log-level= Set global log level
--log-level=:
Set specific log level
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address

EAL options for DEBUG use only:
--huge-unlink Unlink hugepage files after init
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)

EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated

rte_eal_init fail
dpdk_eal_init fail
dpdk init fail

[alongpan]

这个版本启动报错，一摸一样的配置回退就可以了
mode client
socket_mem 12000
cpu 0 2 4 6
rss auto l3l4
tx_burst 8
launch_num 8
duration 3000h
cps 40000
cc 2000010
vlan 1234
client 192.168.31.10 200
server 192.168.99.240 1
listen 80 2
http_method POST
packet_size 128
keepalive 5980ms
lport_range 60526-65535
port 0000:04:00.0 192.168.31.10 192.168.99.240

[pengjianzhang]

你用的是哪个dpdk版本

[alongpan]

19.11.10

[pengjianzhang]

修复了，更新一下代码，再试一下

[alongpan]

还是有问题，无法启动
Error: bad gateway. dperf cannot find gateway's MAC address. Please check the link.

[pengjianzhang]

port 0000:04:00.1 192.168.99.240 192.168.31.10
这两个IP在同一个网段吗 192.168.99.240 192.168.31.10 ？

[alongpan]

不是同一个网段，没过三层的，改成老版本可以跑通

[pengjianzhang]

192.168.31.10 是LB地址？
如果不是同一网段，那就要配MAC地址
这不是BUG

[alongpan]

不是LB，我们这个配置不写掩码，实际下发配置会带掩码吗？我的环境非常简单，就是client和server对发，中间过二层交换机

[alongpan]

client和server都改成192.168.31.x也不行，用回老版本192.168.99.240 192.168.31.10也可以通

[pengjianzhang]

如果client server互打，那么配置就该这样

client A 200
server B 1
port 0000:04:00.0 A B

[alongpan]

是的，两边的ip和网关是互指的

[pengjianzhang]

你把client server都改成31网段，把两边配置发一下

[alongpan]

mode client
socket_mem 12000
cpu 0 2 4 6
rss auto l3l4
tx_burst 8
launch_num 8
duration 3000h
cps 40000
cc 2000010
vlan 1234
client 192.168.31.10 200
server 192.168.31.250 1
listen 80 2
packet_size 128
keepalive 5980ms
lport_range 60526-65535
port 0000:04:00.0 192.168.31.10 192.168.31.250
http_method POST
disable_ack

[alongpan]

mode server
socket_mem 12000
tx_burst 8
payload_random
cpu 12 14 16 18
rss auto l3l4
vlan 1234

duration 3000h
packet_size 128
keepalive 10s

port 0000:04:00.1 192.168.31.250 192.168.31.10
client 192.168.31.10 200
server 192.168.31.250 1
listen 80 2

[pengjianzhang]

1. 用disable_ack分支，这个配置会出现找不到网关MAC吗?
2. 用哪个版本是没有错的？

[alongpan]

1、是的
2、我上一个版本是用的post那个分支

[pengjianzhang]

两边都同时启动看看，把最后的输出贴一下，主要是 看下arp统计 如：
Total Numbers:
...
...
arpRx 2 arpTx 2

[pengjianzhang]

另外，请试一下主干 是否有错 https://github.com/baidu/dperf/tree/main

[alongpan]

没看到arp统计，怎么看呢？
感觉是启动太慢，要么client或者是server，启动接近20秒，一端已经结束了，两外一端还没开始。

[alongpan]

arpRx /home/dperf/build/dperf: unrecognized option '--no-telemetry' EAL: Detected 24 lcore(s) EAL: Detected 2 NUMA nodes EAL: FATAL: Invalid 'command line' arguments. EAL: Invalid 'command line' arguments.

Usage: /home/dperf/build/dperf [options]

EAL common options: -c COREMASK Hexadecimal bitmask of cores to run on -l CORELIST List of cores to run on The argument format is [-c2][,c3[-c4],...] where c1, c2, etc are core indexes between 0 and 128 --lcores COREMAP Map lcore set to physical cpu set The argument format is '<lcores[@CPUs]>[<,lcores[@CPUs]>...]' lcores and cpus list are grouped by '(' and ')' Within the group, '-' is used for range separator, ',' is used for single number separator. '( )' can be omitted for single element group, '@' can be omitted if cpus and lcores have the same value -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores --master-lcore ID Core ID that is used as master --mbuf-pool-ops-name Pool ops name for mbuf to use -n CHANNELS Number of memory channels -m MB Memory to allocate (see also --socket-mem) -r RANKS Force number of memory ranks (don't detect) -b, --pci-blacklist Add a PCI device in black list. Prevent EAL from using this PCI device. The argument format is domain:bus:devid.func. -w, --pci-whitelist Add a PCI device in white list. Only use the specified PCI devices. The argument format is <[domain:]bus:devid.func>. This option can be present several times (once per device). [NOTE: PCI whitelist cannot be used with -b option] --vdev Add a virtual device. The argument format is [,key=val,...] (ex: --vdev=net_pcap0,iface=eth2). --iova-mode Set IOVA mode. 'pa' for IOVA_PA 'va' for IOVA_VA -d LIB.so|DIR Add a driver or driver directory (can be used multiple times) --vmware-tsc-map Use VMware TSC map instead of native RDTSC --proc-type Type of this process (primary|secondary|auto) --syslog Set syslog facility --log-level= Set global log level --log-level=: Set specific log level -v Display version information on startup -h, --help This help --in-memory Operate entirely in memory. This will disable secondary process support --base-virtaddr Base virtual address

EAL options for DEBUG use only: --huge-unlink Unlink hugepage files after init --no-huge Use malloc instead of hugetlbfs --no-pci Disable PCI --no-hpet Disable HPET --no-shconf No shared config (mmap'd files)

EAL Linux options: --socket-mem Memory to allocate on sockets (comma separated values) --socket-limit Limit memory allocation on sockets (comma separated values) --huge-dir Directory where hugetlbfs is mounted --file-prefix Prefix for hugepage filenames --create-uio-dev Create /dev/uioX (usually done by hotplug) --vfio-intr Interrupt mode for VFIO (legacy|msi|msix) --legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments) --single-file-segments Put all hugepage memory in single files --match-allocations Free hugepages exactly as allocated

rte_eal_init fail dpdk_eal_init fail dpdk init fail

主线也报这个错

[pengjianzhang]

给我邮箱发个邮件 pengjianzhang@gmail.com 会议讨论一下吧

[pengjianzhang]

再更新一下主干

[pengjianzhang]

请再试一下 https://github.com/pengjianzhang/dperf/tree/disable_ack

[alongpan]

还是有几个问题：
1、启动时间感觉太长，配置protocol 为HTTP也会提示找不到网关
2、配置disable_ack之后，服务器触发了重传，这个是否也能关掉
3、实际发出的数据包比配置的pcap_size多10byte（这个历史版本都一样）

[alongpan]

[pengjianzhang]

看邮件 会议讨论一下