[BUG] (Bedleveling fails with Z_AFTER_PROBING < 100)

[Vasco-Da-Gama-png]

Bug Description

I use the settings for my Creality CR-10 V3 provided by marlin: https://github.com/MarlinFirmware/Configurations/blob/release-2.1.2.1/config/examples/Creality/CR-10%20V3/Configuration.h

After probing, the print head always raises 100mm what is unnecessary and for a different feature I'm using unpractical as well. Thats why I'd like to reduce that value. But reducing the value Z_AFTER_PROBING from 100 to 50 the probing suddenly fails. And I have no idea why and it makes no sense at all for me. The value seems also quiet high for me as well, as in other configurations its just around 10.

Configuration Files

Required: Include a ZIP file containing Configuration.h and Configuration_adv.h.
Configuration.zip

If you've made any other modifications describe them in detail here.

Steps to Reproduce

1. Compile firmware
2. Flash to printer
3. Try Autobedleveling (G29)
4. Fails with error message: Probe failed. Rewiping.

Expected behavior:

ABL working normally

Actual behavior:

Additional Information

• Provide pictures or links to videos that clearly demonstrate the issue.
• See Contributing to Marlin for additional guidelines.