The Xiaomi Human Body Sensor 2S is not working with the new version of HomeAssistant.

[xysgx]

Using the multi-mode gateway (ZNDMWG03LM) to connect the Xiaomi Human Body Sensor 2S (xiaomi.motion.pir1) results in the sensor being non-functional in the latest version of HomeAssistant, displaying "No issues found".

Subsequently, I set up a test environment where, with Core version 2024.5.0 and gateway3 version 3.3.3, the following is observed:

Contrastingly, in Core version 2023.12.4, employing the same gateway3 version 3.3.3, the sensor operates normally, presenting the following status:

[relliky]

As I mentioned in this thread https://bbs.hassbian.com/forum.php?mod=viewthread&tid=25188&page=1&extra=#pid601311, your integration version is a bit dated and may not be able to pick up any recent fixes. Would recommand you to try to reproduce this issue with the latest integration and submit an issue.

[AlexxIT]

Try the latest version of the integration

[xysgx]

I have also used the latest version of the integration, but the problem remains.
Here's the information I used in the test again today:
HomeAssistant Version:
2024.5.3

Integrated version:
4.0.5

Firmware version of gateway:
1.5.0 _0102

2s Sensor version:
2.0.1 _0036

Sensor Bluetooth address:
F4:B3:B1:91:A2:58

Symptom After the basic log is opened, no sensor-related events are displayed in the log
Log:
home-assistant.log
@AlexxIT